Envy 20" BMX Freestyle Bike

3.4 // 5 reviews
Wethepeople Envy 20" BMX Freestyle Bike
Item sold out. Cannot be delivered
Show similar products

Description

The Wethepeople Envy is a top of the line BMX meant for going freestyle in the park and the streets. With the crisp-sounding cassette hub on this Wethepeople freestyle BMX, you get instant pedal engagement. Equipped with a Chromoly steel frame, this bike offers maximum durability to withstand the impacts of all your tricks. The short chainstay is ideal for technical street riding since it helps making the setup very responsive and trick-friendly.

  • The 3-piece crank is very durable and easy to maintain since you can replace either of the parts in case they break
  • Long 170mm crank arms provide added stability and control
  • Pivotal seat system that allows you to adjust the angle of the seat
  • Comes with holes to mount a gyro brake, so you don't have to worry about wires limiting your barspins
  • A U-brake is included, meant to increase your safety
  • The handlebar on this bike has a back sweep of 10.5° which is intended to ease the strain on your wrists
  • It is equipped with classically sized 20" wheels
  • Both rims have a double-walled construction that is very strong and durable
  • Features a strong half-link so you can finetune the placement of your rear wheel

Model specifications

ModelDriver side
20.5" - Right hand driveRight
20.5" - Left hand driveLeft
21" - Right hand driveRight
21" - Left hand driveLeft

Specifications

BMX Discipline:
Freestyle BMX
Wheel diameter:
20"
Frame Top Tube:
20.5"
Bar design:
Two-piece
Bar height:
9.4"
Bar width:
29.8"
Backsweep:
10.5°
Upsweep:
2°
Hub:
Cassette, Sealed bearings
Frame standover height:
8.75" (22.2cm)
Skill Level:
Advanced
Weight:
24lbs
Frame material:
Chromoly Steel
Seat clamp:
Integrated
Seat:
Pivotal
Seatpost Length:
230mm
Tire width:
2.45"
Pegs:
Not included
Axle diameter:
0.39" (10mm), 0.55" (14mm)
Wheel offset:
24mm
Stem type/Length:
50mm, Top load
Dropout size:
6mm
Stem diameter:
25.4mm
Headset type:
Integrated 1 1/8"
Headtube angle:
75.25°
BMX Brake Included:
Caliper Brake (Front), U-brake (Rear)
Gyro compatible:
Yes
Gyro System included:
No
Gear ratio:
25/9
Crank Length/Type:
170mm, Three-piece
Pedal axle diameter:
9/16"
Sprocket mounting:
22mm, 48-spline, Bolt Drive
Crank material:
Chromoly Steel
Bottom Bracket:
Mid, Sealed
Crank Axle Diameter:
22mm
Pedal material:
Fiberglass, Nylon
Number of spokes:
36
BMX Rim Type:
Double-walled rear rim, Double-walled front rim
Chain type:
Half link
Assembly:
Partly assembled

Reviews

3.4 of 5 5 reviews
3 0 0 0 2
Write a product review
Write Review
Kyle Bailey Shropshire Telford, United Kingdom 5 of 5 I have bmxed for 26 years and this out of the many bmx bikes I have owned is the best bmx I have rode it's perfect for street for park and for dirt jump its weight is perfect its spec is spot on it has to be said value for money its a top tier bike Romuald H. Dublin, Ireland Verified Buyer 1 of 5 Received the bike today, Box was half open in the bottom, the tape isn't strong enough to support the transport. Also when receiving the bike i notice a scratch on the frame, pretty bad for a 1k€ bmx The bar clamp wasn't aligned with the fork, i had to fix it The bolt on the front rear was stuck, impossible to remove, i had to go to the bike shop nearby. I don't recommend, i bought a brand new bike and already noticed some defects! Reply from SkatePro Hi Romuald, thank you for taking your time to give us feedback. We sincerely apologize that you received the bike in such condition. However, it's very important that you contact us immediately about any issues that you notice upon delivery. We can't check our reviews every day, but we do check our emails, phone calls and chats every day. If you contact us about a delivery problem right away in the future, we're able to find a solution for you. ✌ /Your SkatePro Team E. Morgan Bournemouth, United Kingdom Verified Buyer 5 of 5 Have not been on a bmx for so many years ever since I was in school but decided to go all out and always wanted a WTP and it is exactly what I thought it would be , fantastic parts , strong bike overall would definitely recommend to anyone getting back into riding or street riding. Look forward to ordering more from skate pro , thank you for everything ! OLIVER TAYLOR Vassall, United Kingdom Verified Buyer 5 of 5 As an older guy (36) getting back into riding after 10 years. I wanted a quality bike. With solid parts that’s gonna last. The Envy was it. After a month on this beaut bike. It feels great. It’s solid af. Light which helps! And the enjoyment of knowing you have quality beneath is reassuring! Wethepeople and SkatePro delivered. All UK stock sold out of this epic bike. SkatePro were reliable and delivered within a week. Couldn’t recommend SkatePro and the envy enough! Thanks team Gianni francois Kessel Lo, Belgium Verified Buyer 1 of 5 The thread of the crank was broken so I had to put on a new one Reply from SkatePro hi Gianni! Thanks for your review. How annoying! We've been in touch and the problem has since been fortunately fixed. :) //Iris

Guides

Show All
SkatePro