|Page 1 of 2|
Good to know
It's not easy to build your own custom trick scooter. There are as many parts that do not fit together, and a wrong assembly can easily destroy parts. This guide helps with tips and tri...
Improve responsiveness and ride in style with a new pro scooter clamp
On this page, you will find a wide selection of colorful clamps for scooter. They come in many shapes and designs to match your taste and style. Besides the pro scooter clamps practical use, it's also a great part to replace for giving your scooter a personal and visual touch.
Clamps for scooters are used to connect the fork of your scooter with the bar. It is also a necessary part to complete your pro scooter setup. When the scooter clamp is tightened, it makes sure that the fork and bar do not move while you are riding your scooter.
This is important when performing stunts where safety always is key. Pro scooter clamps also make sure that the wheel follows the same direction as your bar when you turn it. This feature helps you to always go in your desired direction. If you start experiencing problems with your scooters responsiveness, the problem will often found in the clamps. Often it will be enough to tighten the bolts, but a replacement might also be necessary in some cases.
Types of scooter clamps
Pro scooter clamps are available in two different sizes:
- Regular scooter clamps - have an inner diameter of 32mm and fit Regular bars.
- Oversized scooter clamps - have an inner diameter of 35mm and fit Oversized bars.
SCS clamps have built-in SCS system and function as a compression system and clamp at the same time. These are also available in 2 sizes.
Note that some scooter clamps are compatible with both Regular and Oversized bars due to an inner shim.
Check out our selection of scooter clamps and find one that gives that extra wow factor to your scooter.