Owners Manual - HangUp Motion Big Wheel Scooter

Congratulations on your new HangUp Motion Big Wheel Scooter.
Please keep a copy of this owners manual for future reference.

Assembly Instructions

This is how the folding mechanism of the HangUp Motion Big Wheel Scooter works.

1. Open the quick-release.

2. Lift the release button.

3. Unfold the scooter.

4. Close the quick-release.

5. Fit the handles onto the handlebar so that it forms a T. The handles are fully inserted when you hear a click.

6. Open the height-adjustment clamp.

7. Raise the handlebar to your preferred height. We recommend setting the handlebar height to reach between the waist and navel of the person riding the scooter.

8. Close the height-adjustment clamp.

Maintenance

1. Wheels and bearings will wear down over time. Once they are worn, replace them with new ones.
2. Always store the scooter indoors and in dry conditions when you are not using it.
3. Clean the scooter and lubricate moving parts regularly.

Safety information

Safety warning. Use at your own risk. Using a scooter can be dangerous and may result in injury or death, even when used with safety gear and under normal usage conditions.

This is important safety information for the user. Even when following these instructions, it is required to use common sense to reduce the risk of accidents.

Always wear proper protective equipment. The minimum requirement is a certified skate helmet, knee pads, and elbow pads.

Only use the scooter on flat, level ground, and dry surfaces.

Respect local traffic and scooter riding laws and regulations.

Before every usage, make sure the scooter is fully assembled. All nuts and bolts should be properly tightened, and all moving parts should be able to move freely.

Kids should only use this scooter under adult supervision.