The Iron trucks are produced in Europe which is quite unique. They are perfect for beginners as well as advanced skaters and the nice selection of colors means that you will easily find one that suits your setup. The high-quality mix of aluminum and steel yields a strong truck that is ready for both park and street shredding.
With the classic barrel-cone bushing-setup and 92A durometer urethane material you will get a truck that is very controllable and smooth to skate.
This is the 5.25" High edition which will let you ride larger wheels than mid or low trucks.
Christian GübeliObernau, SwitzerlandVerified Buyer5 of 5TiptopAxel M.Nürnberg, GermanyVerified Buyer5 of 5Looks like great axles. They look high quality and are well made. No protruding grades. No loose parts etc. In terms of weight, they can keep up with much more expensive axles. The first ride was pleasant.
Made in Europe!Marin Van Dinh NguyenNantes, FranceVerified Buyer5 of 5Fast shipping.Christian BrikerIbach, SwitzerlandVerified Buyer5 of 5SuperNicolas BenattiSoultz-Haut-Rhin, FranceVerified Buyer5 of 5Appears to be of good quality.
Mounted on the board, just waiting to be tested.Rachid M.Othis, FranceVerified Buyer5 of 5Tip topDEMONTROND GhislainePerpignan, FranceVerified Buyer5 of 5TopL. GoodForch, SwitzerlandVerified Buyer4 of 5nice optics, good qualityPhillip DoyleTralee, IrelandVerified Buyer3 of 5Rubber bushings are poor quality. Damaged when trucks were tightened. I ended up using bushings from old trucks, which are working fine. Other than that perhaps the trucks are a bit heavy but that's priced in at the lower price range.Reply from SkateProThank you for your time in leaving a review. We are sorry to hear that your experience with the product was not positive. The bushings that come with the entry level trucks are usually hard, so if we tighten them too much they can break. However, even if the product is not top of the range, it should be able to withstand several sessions until the bushings break. We are glad to hear that you have been able to find a shaft that works well with the axle and hope that if you need any advice for your next purchase please do not hesitate to contact us. /Team SkateproLeandro CastellucciaMombretto, ItalyVerified Buyer4 of 5Excellent quality-price trade-off