TLC Wedge Phorx Pro Scooter Fork

One piece pro scooter fork.

28mm thick & 15cm long "closed top" pipe. 5mm hole with thread.

Threads on the inside of cap engage with the threads of pro scooter fork. When you tighten the clamp on the bars, the threads "Lock" together.
Then screw on the compression cap.

Built-in machines starnut, so you can use with any SCS or HIC, dont use the included shim in this case.

Notice:

The shim does only fit Phoenix Bars.
The shim can be very difficult to put in, use a big hammer and put wood in between when you knock it down.