×
Menu

Yoko YXR Jacket Men Size Chart

XS S M L XL 2XL Grading
1/2 Chest width 47.2 cm 49.2 cm 51.2 cm 53.2 cm 55.2 cm 57.2 cm 2
1/2 Waist width 45.5 cm 47.5 cm 49.5 cm 51.5 cm 53.5 cm 55.5 cm 2
1/2 Bottom width 46.8 cm 48.8 cm 50.8 cm 52.8 cm 54.8 cm 56.8 cm 2
Back length 66 cm 68 cm 70 cm 72 cm 74 cm 76 cm 2
Sleeve length 79 cm 81 cm 83 cm 85 cm 87 cm 89 cm 2
1/2 Armhole width 21 cm 22 cm 23 cm 24 cm 25 cm 26 cm 1
Collar height 8 cm 8 cm 8 cm 8 cm 8 cm 8 cm 0
1/2 Collar circumference 23.4 cm 24 cm 24.6 cm 25.2 cm 25.8 cm 26.4 cm 0.6
1/2 Cuff width 8.5 cm 9 cm 9.5 cm 10 cm 10.5 cm 11 cm 0.5

How to measure

Follow the instructions below and compare your measurements with the size chart

1/2 chest circumference

To measure the half-chest circumference, lay down the t-shirt / hoodie / jacket on a flat surface and measure the width between side seams (a few cm below the sleeve and side seam joint).
Note: Measure width, not circumference. The measurement relates to the width of the product not the body.

1/2 waist width (relaxed)

To measure the half-waist width (relaxed), lay down pants on a flat surface and measure the waist width from left to right.
Note: Measure width, not circumference. The measurement relates to the width of the product not the body.

1/2 bottom width

To measure the half-bottom width, lay down the t-shirt / hoodie / jacket on a flat surface and measure the width between side seams in the bottom area.
Note: Measure width, not circumference. The measurement relates to the width of the product not the body.

Back body length

Measure the length between the neck seam and rear bottom hem.

Sleeve length to neck

Measure the length between the neck seam and the wrist.

Sleeve width

To measure the sleeve width (half-arm width), lay down the t-shirt / hoodie / jacket on a flat surface and measure from one side of the sleeve to the other.
Note: Measure width, not circumference. The measurement relates to the width of the product not the body.

Collar height

Measure the height of the collar on your current hoodie or jacket.

Sleeve hole width

To measure the sleeve hole, lay down t-shirt / hoodie / jacket on a flat surface and measure the distance between one corner of the sleeve across to the other side.

Tip! Use a soft measuring tape, to ensure that the product fits properly. Alternatively, use a piece of string and then measure it against a ruler

SkatePro
Privacy policy Cookies Terms and conditions