|
Muy bueno y rápido el servicio |
| Andres Argüelles López (Illora ) |
|
06/19/2019
Evaluación: 4 de 5!
|
|
|
Those wheels are great. Thank you for such a quick shipping. You guys rock. I am now your customer yaii. |
| Roberto J Lopez Blum (Orlando) |
|
04/21/2021
Evaluación: 5 de 5!
|
|
|
Wheels are good and delivery was fast. |
| Viachaslau Stesik (Redmond) |
|
03/12/2020
Evaluación: 5 de 5!
|
|
|
Happy with my purchase |
| Marc Osborne (Bradford) |
|
04/22/2022
Evaluación: 4 de 5!
|
|
|
Ordered and received 2 wheels. High quality as expected.. I had to order wheels because skatepro wouldn’t supply the tubes for the product they sell. After placing this order I contacted their vendor directly who supplied me with 2 tubes for the 12 euro + shipping. |
| David G. (Naas) |
|
05/12/2021
Evaluación: 4 de 5!
|
|
|
Timely and accurate delivery. No hiccough with purchase. Sustainability should see a replacement tube being available. Any way it works again. |
| Rory Page (Cavan) |
|
04/06/2021
Evaluación: 4 de 5!
|
|
|
I am using these wheels for another purpose and they are just what I needed: strong, light, silent running, and nicely made... just the job!
Skatepro provide a great service - excellent website, easy to use and prompt delivery |
| Steve Gosse (Louth) |
|
03/23/2021
Evaluación: 5 de 5!
|
|
|
I am not using those wheels for a scooter but for my kid's balance bike. I needed smaller wheels than the one provided with the bike. It works perfectly. Those wheels are easy to inflate/deflate and have a good enough grip for this usage. Would definitively recommend. |
| Romain C. (Dublin) |
|
03/02/2021
Evaluación: 5 de 5!
|
|
|
Very good grip & takes the bumps out rough surfaces, takes small kerbs ok, beware large kerbs. Inflates well, a little difficult to connect though. All in all a good tire for wet. |
| Anthony Wall (Reading, Berkshire) |
|
11/15/2017
Evaluación: 3 de 5!
|
|
|
Great wheels - I replaced my standard wheels with the pneumatic ones and the ride is great. One point, I pumped these up by hand and they felt ok, but when using they were very flat. After pumping them up properly to 60psi not 11 by hand the ride was much smoother. |
| Steffan P. (Redhill) |
|
04/24/2017
Evaluación: 5 de 5!
|
|
|
It says on the side to not pump wheel above 65psi. 65psi makes scooter really slow... Almost quicker walking.... Noticed that micro scooter brand with pneumatic tyres requires 80psi... 65psi looks like they are using pram wheels.... Only giving one star because I have to. |
| Louis Frew (GLASGOW) |
|
04/18/2017
Evaluación: 1 de 5!
|
Respuesta de SkatePro: We are sorry to hear that you are not happy with wheels. It's hard to say why there is a difference for the suggested PSI when comparing Micro and Frenzy, but the reason why it should be 65 PSI on frenzy, is that this is the optimal amount pressure for this particular wheel. It's not our experience that the wheels are slow when inflated to this amount of pressure, so we would like to take a look at the wheels you have and get some more information from you, so we help find a solution. It would be really helpfull if you could send us a short video where you show the wheels rolling.
/Mads :) |
|
|
I'll keep it simple. I rode the Frenzy on the stock wheels about 800m and my knees hurt.
I put the pneumatic wheels on and I've been scooting 4 miles a day with no ill effects. They work, so I'm pleased. |
| Sanchi Gordon (London) |
|
03/29/2017
Evaluación: 5 de 5!
|
Mostrar todas las 68 reseñas
